WMA850-1500E Bentonite cement grout mixer and agitator

WMA850-1500E grout mixer and agitator is a skid mounted, colloidal grout unit. This system is designed to provide a continuous mixing operation.

It is a combination consist of a steel sheet cylindrical mixer tank, heavy-duty slurry pump, and agitator tank, set-up on a strong base frame.

WMA750-1500E Grout turbo mixer/agitator

WMA750-1500E Grout turbo mixer/agitator is a combination consist of a steel sheet cylindrical mixer tank heavy-duty slurry pump and agitator tank, set-up on a strong base frame. The slurry is mixed through a high speed vortex produced by a special pump which, after sucking the material from the bottom of the mixer tank, sends it back tangentially into the same tank in order to get highest possible efficiency. By this process it is possible to obtain homogeneous colloidal and high quality mixtures within a very short period of time.
After mixing, this mixtures are pumped into the agitator tank with slow speed mixing paddles by the above same pump.
When the mixtures in mixer tank are completely pumped out, to shift the specially design handle valve to continue to mix the next cycle slurry.

WM500E high shear colloidal grout mixer

WM500E high shear colloidal grout mixer is a high speed high shear grout mixer. WM500E high shear colloidal grout mixer has been designed for use either in conjunction with a conventional paddle mixer and pump or by virtue of its own built in impeller pump, as a stand-alone mix and place machine. The unit will rapidly and efficiently mix various types of grout which can include cement, bentonite and sand. It is specially design for cement mixing and grouting in ground/underground engineering. We also can design the mixer with agitator, to make the mixing work can continuously be done.

WM400D high speed grout mixer

WM400D cement grout mixer is a high speed grout mixer. It has been designed for use either in conjunction with a conventional paddle mixer and pump or, by virtue of its own built in impeller pump, as a stand-alone mix and place machine. The unit will rapidly and efficiently mix various types of grout which can include cement, bentonite and sand. It is specially design for cement mixing and grouting in ground/underground engineering. We also can design the mixer with agitator, to make the mixing work can continuously be done.

WMA400-700 Cement Mixer And Agitaor

WMA400-700 grout mixer and agitator is a combination of mixer and agitator. It is a skid mounted, colloidal grout unit. This system is designed to provide a continuous mixing operation.

High shear high speed colloidal grout mixer ensures fast mixing. The agitating holding tank has a vertical shaft with horizontal blades that are in constant contact with the material to maintain a thoroughly mixed grout. The mixing work can continuously be done. All components are easily accessible for operating, cleaning and maintenance

WMA500-1000E Cement grout mixer and agitator

WMA500-1000E cement mixer & agitator is a combination of mixer and agitator, it is specially design for continuous cement mixing and grouting in ground/underground engineering. It can fast mix water, cement and additive, then the mixed slurry can be stored into a 1000 liters agitator, thus the mixing work can continuously be done.